 | Plastic Sets We manufacture polypropylene plastic packages (boxes, lids and caps) for all sizes, colors and models of batteries.
The raw material is polypropylene, resistant material exclusively for the batteries. |
 | Grid
It is used as feedstock antimonial lead. This comes in ingots. This produces a flexible and resistant to corrosion.
|
 | Molino
In this part of the process uses high purity lead. With this material is made of lead oxide which then become active material of the plate. The pure lead is introduced into a melting pot for the development of small cylindrical parts, which are subsequently introduced to a reactor Shimatzu where the oxide of lead.
|
 | Mudded
Lead oxide is transported to a storage silo. Subsequently passed to the pulping machine which also uses other inputs: where pasta is made by positive and negative blocks.
Then placed on the grid, thus the board, which passed to a curing chamber where leaves a high quality product, very resistant to vibration |
 | Formation This process produces the transformation of the positive and negative plates through an electrochemical process, which after being dried are called dry plate loaded and ready for use in the next manufacturing process. |
 | Dry Plate
Upon leaving the training process plates are rinsed to remove all traces of sulfuric acid. In the case of negative plates, they are soaked in a saturated solution of boric acid and dried under vacuum for the space of 12 hours. The positive plates are dried with hot air in a drying chamber.
|
 |
Assembly
At last we have the manufacturing process as the assembly of the batteries - both automotive and solar. |
|
PRODUCTION 
